Rebirth 99 to become a car giant

Inside the Spring City Stamping Die Workshop, there was a lively scene.

The first thing Liu Darui, head of the technical department, does when he goes to work every day is to come to the workshop to confirm the processing progress.

Normally, it takes about three months to complete a pair of medium and large stamping dies.

Processes such as milling the forming surface and improving the precision of the grinding machine are time-consuming, and there are no shortcuts to take.

However, in order to improve the progress, Liu Darui directly arranged three teams to work day and night, and properly realized "007" in disguise.

In this way, in half a month, the outline of the mold has come out.

"Mr. Dong, according to this progress, the test stamping can be assembled next week."

"At that time, the Jetta door hinge reinforced nut plate can be switched to our factory's own production, and other nut plate molds will be processed one after another to achieve our Spring City speed."

Liu Darui was in high spirits at this moment.

Previously, TDM molds were used to make nut plates, which not only often cracked, but also cost a lot, which made him very embarrassed.

Now I have accidentally obtained the mold technology of PRG. As long as I digest and absorb it, I can not only solve the production problem of the nut plate, but also expand it horizontally to other stamping parts.

At that time, in the whole Spring City, which stamping parts factory will be their opponent?

In terms of relationship, they are subsidiaries of Spring City Motor Group.

Compared with the cost, the processing fee of the PRG process is only a fraction of that of TDM.

At that time, Chuncheng Volkswagen and Chuncheng Automobile Group can eat all kinds of stamping parts orders that they don't want to eat.

"Stop the mold processing of auto parts, complete the mold of the nut plate first, and try to replace all the nut plates of Nanshan Auto Parts Factory next month."

After Dong Chun came back from Yangcheng, he had a deep resentment towards Nanshan Auto Parts Factory.

If I don't teach them a lesson, the anger in my heart will never be calmed down.

Of course, the most important thing is to use the PRG process to make the nut plate, which is a good thing for Dong Chun to kill two birds with one stone.

Not only avenged the Nanshan Auto Parts Factory, but also made political achievements.

He has already made a report with Chuncheng Automobile Group, and plans to give a report on the new technology achievements of Chuncheng Stamping Plant next month, so that the brother companies and group leaders in the group can see the extraordinaryness of Chuncheng Stamping.

Maybe at that time, I can be transferred back to the group and rise up step by step.

"If all other molds are stopped, will it affect the trial production schedule of other car parts?"

Liu Darui cautiously reminded him.

"How long will it be affected? The trial delivery schedule of those models already has a margin, not less than ten or eight days."

"Remember, producing all the molds for the nut plates used in the models of Spring City Volkswagen and Modu Volkswagen is the most important job in the factory recently, not one of them!"

When Dong Chun said this, Liu Darui naturally didn't dare to object.

However, he secretly cried out in his heart.

Among the materials I received, there are only part of the design data of the nut plate and the mold structure diagram.

This means that some content needs to be digested and absorbed by them before designing.

Originally, he wanted to produce a set of molds first, and then slowly produce others.

Now Dong Chun wants him to free up all the production capacity of the mold workshop for nut plate moulds.

His pressure increased immediately.

"Mr. Dong, the technical department must go all out and resolutely complete the task."

Going against the leader will not end well.

Liu Darui was able to get into the position of head of the technical department, of course, not simply because of his superb technology.

Soon, the people in the stamping technology department of Spring City began to work overtime every day.

Six sets of PRG molds were started at the same time, and more than one million yuan was invested in one breath.

This is not counting their own internal processing fees.

With such efforts, the first set of door hinge reinforcement nut plates for Jetta models was finally assembled.

Originally, Liu Darui wanted to debug it in a low-key manner to see if there was any room for improvement.

After all, for stamping dies, continuous debugging after assembly is a very important task in itself.

However, in order to show his importance and to make the next "PRG Die Technology Achievement Exhibition" look decent, Dong Chun had to arrange a ceremony to celebrate the completion of the assembly of the first set of PRG dies designed and produced by Chuncheng Stamping and start the test machine.

As the only stamping plant under Spring City Automobile Group, Chuncheng Stamping Plant has more than 1,000 employees.

Although not everyone attended the ceremony, it was considered very grand.

Dong Chun even invited local leaders and reporters from Spring City TV Station and some newspapers to attend the meeting.

At this ceremony, Dong Chun personally came to the stage and gave an enthusiastic speech for an hour.

While thanking the local leaders and the group for their support, and affirming the hard work of the employees, Dong Chun constantly emphasized how to grasp the development direction of the industry, set up a research team for PRG molds, and personally led everyone to catch up with the progress day and night.

In short, Spring City Stamping can produce PRG molds, which is the result of his efforts.

As for Spring City Stamping, which did not produce PRG molds at all or even studied PRG molds more than a month ago, and made a technological breakthrough so quickly, Dong Chun deliberately played down this issue.

Anyway, except for those personnel in the company's technical department, other people don't know the specific situation at all.

I said that I set up a research team for PRG molds. Is it wrong?

No!

During this period of time, there was indeed such a team in the technical department.

Is it wrong to say that you grasp the development direction of the industry?

No!

The PRG process is definitely one of the future development directions of the stamping industry.

In the production of small and medium-sized parts, PRG molds have unparalleled advantages in cost and efficiency.

At present, almost all domestic stamping factories are still using the TDM process. I took the Spring City Stamping Factory to break through the PRG process. Isn’t this far-sighted?

Liu Darui was a little worried when he heard Dong Chun boasting about the PRG mold next to him.

The mold is definitely usable, he is confident in this.

But is it possible to produce good parts...

There is no trial mold, no small batch production verification, he is not sure!

It's a pity that nothing can be said now.

Soon, Dong Chun and several other leaders symbolically pressed the start button of the stamping machine.

The PRG mold produced by Chuncheng Stamping Factory skipped the trial mold and directly entered the stage of small batch trial production.

Bang!

Bang!

Bang!

The crisp sounds, like beautiful music, made Dong Chun smile a little more.

Taking advantage of this opportunity, he eloquently introduced to the leaders of Spring City Motor Group.

However, when the first part was produced, Dong Chun's expression changed as soon as he picked it up.